Cleaning the MDF cabinet
Cleaning the MDF cabinet
Use a wet sponge to clean the MDF cabinet and avoid acid and alkaline detergents. Because the use of these materials in the cabinet and its fittings imposes irreparable damage. If you notice, the MDF cabinet surface is shiny. Hence, due to the use of acid detergents, its surface is eliminated. The fittings used in the category for drawer and shelf are also sensitive to these materials and after several times, the surface of these fittings is peeled or so-called skin.
Use a lint-impregnated detergent to clean the MDF cabinet and then dry it with a lint-free cloth several times and then dry. The best detergent is glass saline solution.
Avoid moisture to MDF cabinets
Never hang the kitchen towels to dry from the doors or cabinet hinges, as long contact with the cabinet will cause serious damage to it. To clean the doors with MDF or aluminum profile frame, be careful not to penetrate the detergent and water into the seams. Because the penetration of water will mold and create bacteria, and in the end will break down the doors.
Open and close the door of the MDF cabinet
Do not open door closers with horizontal hinges for a long time. Because steam and cooking fat can damage them, a fatty layer is formed on them that is hard to clean. Do not open the door more than the usual angle, because the collision of the doors will be damaged and will cause erosion between the doors and the body.
Eliminating the color effect on MDF cabinets
Do not use straighteners, handwraps, ink, and markers to remove stains, such as whiskeys, austons, industrial alcohol. Because these materials can damage the MDF surface. It is best to dilute and use them with water. In a bucket of water filled up to a half, add a spoon of alcohol or a cleaner to mix thoroughly.
Note: Be sure to keep glass of vinegar, oil, jam, and marinades before you place it in the cabin, underneath it, or do not open it, as it will cause the cabinet to be damaged in the long run.
HPL pages
Cabinets made of HPL or Crane (Artificial Stone) that are suitable for the cabinet surface are antibacterial and have good resistance to heat and shock, but in some cases, due to the lower cost of the cabinets of the same gender, The cabinet door (melamine) with an edge of 8 cm and PVC is used as a cabinet board. Its resistance is not like a corporate page, and so-called cabinetry is not a cabinet panel of a company. So, on the case of the Cabinets, Crane, and Double Panel pages, you should pay attention to the following points.
Avoid stroke on MDF cabinets
Avoid cutting vegetables and other food on the cabinet without using a suitable board. Avoid scrubbing stains and dry foods on the screen and rinse them with acid detergents.
Cabinet resistance against water and heat
Avoid the accumulation of water around the sink and the corners of the cabinet panel for a long time and be sure to dry with a suitable cloth, because in the long term it will eliminate sealing and water penetration into these areas and eventually cause decay in your cabinet.
While the cabinets are well tolerated in the heat, it is better not to place hot dishes straight on the cabinet and use the pans.
MDF MDF Cabinet Resistance
Avoid placing heavy objects on a part of the screen below it, such as on a dishwasher and washing machine.
Caspian, using the knowledge and experience in the wood industry and having advanced tools and machinery, the ability to design and implement all types of cabinets, wood cabinets, helicopter cabinets (modern cabinets), membrane cabinets, construction and installation of various types of doors All wood, MDF door without PVC overlays in the implementation of designs on the door with a CNC machine, HDF door with uncoated PVC in the implementation of designs on the door with a CNC machine, a door with a melamine coating, the construction and installation of a wardrobe and wall cabinet And a variety of complex wooden structures throughout Gilan and Rasht for your loved ones