What is pvc? Types and ways of producing it

What is a pvc tape? Types and ways of producing it

PVC tape is a product that is used to cover the edges that are cut and without MDF, and the need for this product is felt with increasing consumption of MDF boards.

In line with the flourishing of the wood industry, along with the production of artificial products in the industry and the production of chipboard and MDF panels, there were stretch marks on the edge.

The main reason for the production of such devices was the use of these types of plates and their rehabilitation against environmental conditions such as heat, humidity and vermin, which caused a lot of damage to these types of plates daily.
PVC tape is a product that is used to cover the edges that are cut and without MDF, and, given the increasing use of MDF boards, this product is felt.
In line with the flourishing of the wood industry, along with the production of artificial products in the industry and the production of chipboard and MDF panels, there were stretch marks on the edge.
The main reason for the production of such devices was the use of these types of plates and their rehabilitation against environmental conditions such as heat, humidity and vermin, which caused a lot of damage to these types of plates daily.
Strengthening
Of course, today, this discussion, namely, the retrofit of the plates has become diminish against the environmental conditions, and more attention is paid to its exquisite beauty. But the only reason behind the adhesive edge is the retrofitting of the pages.
As you know, these plates react to the heat and humidity of the medium after cutting and change the edge of the edges. It also becomes a major dilemma when using them, for example in office or home environments, causing user discontent.
But with the passage of time and technological advancement, this issue has come to a different color and created a massive transformation.
Our country’s industry was no exception to this, and it was a little delayed. At first, adhesive tapes were introduced into the Iranian market, and manufacturers started using their basic tools like OEM to produce their own products, but this resulted in many problems, and poor quality was not achieved.
Over time, several devices were offered to the industry, which made things much easier and increased the volume of production, but again due to the heat recovery of parts in different environments, quality was not achieved and these strips were screwed over from the edge of the pages.
Where is the job?
Another system that complements the industry was the use of granular adhesives (thermosetting) in the devices, which mode of operation of the system is such that first glued either to the back of the bar or on the edge of the work was rubbed with special rollers, and then the tape on The edge was pressed.
This method was very good at first, but after some time the system worked on other problems. For example, due to the cold and constant warming, the glue gradually lost its adhesion status, and after several times the heat exchanger lost their quality.
Also, the glue after several generations of cold and warming remains in the form of burned layers inside the reservoir or on the surface of the work, which is a huge problem, and even cleaning the systems was very difficult for the user.
But nowadays, using the PVC edges, these problems have been fixed and heat, moisture, cold and so on have become more resilient, which is the most advanced kind of PVC edges made in Turkey. The edge bar used in the wood industry and decoration is made of two different sexes of PVC and melamine. The PVC edge strip is made of highly durable and plastic materials, and is supplied in thicknesses of 1.2, 0.4 mm to the widths of 52, 42, 35, 28, 20 mm.
Summary: The PVC strip is a product that is used to cover the edges that are cut and not covered with MDF. Due to the increasing use of MDF boards, this product is felt. For more information, see our contact section.