Digital Protractor

Digital Protractor is one of the tools used to accurately measure angles. Measurement tools today play a significant role in the industry. One of the tools used to control the angle is the digital protractor. As you know, the tools and equipment used in the wood industry and carpentry should do their job accurately and without mistake. In the woodworking industry, the precision is the first letter. The more accurate your instrument, the more precise your final work will be done. Even the best masters with bad devices do not have the ability to perform a clean, clean job. One of the devices used to adjust and calibrate woodworking tools is a digital goggle. These devices, with a precision of 10 mm, assure you that your tool will accurately cut it.
In the wood industry, one of the most important concerns of the operator is the proper functioning of machines such as Persian, Saw, Table saws, and Saw Blades during cutting. You should know that even a degree of disagreement during the cutting will cause the components to be inoperative during the execution of the work and the construction of the structure. This inconsistency at the angles at the end will be a weak and worthless task.
Woodworking machines will be out of standard factory settings and calibrated tools after a short time due to impact and detachment of parts. You need a special tool for precise calibration. The digital protractor is the solution to your problem. A device that is more accurate than any other tool that will install the saw blade and Farsi on your workshop.

How does a digital piercer work?

The core of the digital protractor is similar to the gyroscope in the foam starter. In fact, benchmarking and mobile meter readings receive information from this sensor. For this, 9-axis sensors are commonly used, with three axes for the accelerator sensor, three axes for the gyroscope and the remaining three axis known as the compass axis (Compass).

How to use a digital protractor to adjust the angle of the saw blade

First, turn on the device. Place the device from the magnet on the plate saw plate and press the ZERO button to display the zero number. Then place the protractor on the blade to display the sharp angle of the blade.

It’s easy to get the size of the angle and the amount of deviation of the blade. With this device, you can quickly and accurately adjust the angle of the Persian saw blade to the saw saws.

The important advantage of using this device is that the device does not need to be recalculated or calibrated by the expert to adjust and calibrate the machine. You can easily set the device at its best. Nowadays, managing time and costs is very important and, given the presence of a protractor, you can better check the accuracy of your device.

Caspiandoor, using the knowledge and experience in the wood industry and having advanced tools and machinery, the ability to design and implement all types of cabinets, wood cabinets, helicopter cabinets (modern cabinets), membrane cabinets, construction and installation of various types of doors All wood, MDF door without PVC overlays in the implementation of designs on the door with a CNC machine, HDF door with uncoated PVC in the implementation of designs on the door with a CNC machine, a door with a melamine coating, the construction and installation of a wardrobe and wall cabinet And a variety of complex wooden structures throughout Gilan and Rasht for your loved ones.

All Rights Reserved