Wrapping wooden plates

Wrapping wooden boards is one of the most commonly encountered problems in wooden and laminated composites. In most cases, ignoring the conditions
Controlling continuous changes in temperature and humidity, lack of attention to production conditions, etc. can have a significant impact on these problems.
One of the reasons why the layers of wood are warped include:

-Thin loose with thick layers.
. Unbalanced gluing of the sides of the brain, also excess adhesion or lack of adhesion or low glue, as well as the inequality of adhesion on the sides of the brain.
. Ask too thin sheets when one side of the press is open or between page openings.
. The various humidity and density of the outer plates also cause these problems.
. The drying time in the press, before pressing or during the press.
. Draw the pages before cooling down.
Warping wooden plates

In the following, we will draw your attention to some of the points that prevent these problems from occurring.

. Store and stack the wooden sheets correctly. Controlled storage conditions such as moisture and high temperatures that should be avoided should also be controlled.
. Put the wood wool on the basis of the type and weight, and make sure that each one has control conditions on their own, with the ideal temperature and humidity of 70 degrees Fahrenheit and 35 percent respectively.
. Make sure the fibers and machineries are all in one face on both sides.
. Make sure that the press conditions are the same for both sides and that they are fully glued.
. You may use an equilibrium structure at the same temperature for both sides up and down.
. If you are not pressed or pressurized, opening too much pressure will slow down the pressure.
Put 7 pressed pages after pressing where it is perfectly flat to reach a temperature of 120 degrees or less.
Caspiandoor, using the knowledge and experience in the wood industry and having advanced tools and machinery, the ability to design and implement all types of cabinets, wood cabinets, helicopter cabinets (modern cabinets), membrane cabinets, construction and installation of various types of doors All wood, MDF door without PVC overlays in the implementation of designs on the door with a CNC machine, HDF door with uncoated PVC in the implementation of designs on the door with a CNC machine, a door with a melamine coating, the construction and installation of a wardrobe and wall cabinet And a variety of complex wooden structures throughout Gilan and Rasht for your loved ones.